TEM characterization of some crude or air heat-treated SiC Nicalon fibres

Commercial Nicalon fibres were prepared by thin transverse sectioning and studied by transmission electron microscopy. A progressive tilting of the incident beam allows us to explore the selected-area diffraction (SAD) pattern along two orthogonal directions, increasing the tilting angle (dark-field (DF) imaging). The lattice fringes technique was also used. The samples were Nicalon 001, 101 and 201 fibres, the latter also being studied after heat treatment in air at 1300° C for 48 h. The SAD pattern of the 001 fibre only shows the SiC, 1 1 intense halo whereas the other samples show all the SiC (1 1 1, 2 2 0 and 31 1) strongly scattered beams, indicating a microcrystalline state. Correspondingly, DF imaging does not indicate any localized measurable scattering domain for 001. Only bright dots can be seen, less than 1 nm in size. The other fibres show SiC microcrystals respectively 2 nm (1 01 ), 3 nm (201 ) and up to 7 nm (heat-treated 201) in extent. Free aromatic carbon, shaped in small units less than 1 nm in size fills up the interstices between SiC. These units tend to lie flat on SiC. In heat-treated fibres, they form incomplete layers around the edges. In addition, the heat-treated 2 01 fibre show a 1m thick layer of cristobalite at the fibre surface. These crystals are polytypes.     

Conception assistée par ordinateur des circuits intégrés monolithiques hyperfréquences

Computer aided design of microwave monolithic integrated circuits must combine two different fields. The first domain is the simulation of microwave circuits taking into account non linear aspects development of time domain and harmonic balance simulation algorithms specialized for microwave circuits. In the second place are found, the layout algorithms which were developed for logic circuits (on Si or GaAs). The association of these two types of algorithms leads to the constitution of aCad workstation for microwave monolithic integrated circuits. Two examples of design and realization of integrated circuits with these tools are presented.     

Refining Genotypes and Phenotypes in KCNA2-Related Neurological Disorders

Pathogenic variants in KCNA2, encoding for the voltage-gated potassium channel K_v1.2, have been identified as the cause for an evolving spectrum of neurological disorders. Affected individuals show early-onset developmental and epileptic encephalopathy, intellectual disability, and movement disorders resulting from cerebellar dysfunction. In addition, individuals with a milder course of epilepsy, complicated hereditary spastic paraplegia, and episodic ataxia have been reported. By analyzing phenotypic, functional, and genetic data from published reports and novel cases, we refine and further delineate phenotypic as well as functional subgroups of KCNA2-associated disorders. Carriers of variants, leading to complex and mixed channel dysfunction that are associated with a gain- and loss-of-potassium conductance, more often show early developmental abnormalities and an earlier onset of epilepsy compared to individuals with variants resulting in loss- or gain-of-function. We describe seven additional individuals harboring three known and the novel KCNA2 variants p.(Pro407Ala) and p.(Tyr417Cys). The location of variants reported here highlights the importance of the proline(405)–valine(406)–proline(407) (PVP) motif in transmembrane domain S6 as a mutational hotspot. A novel case of self-limited infantile seizures suggests a continuous clinical spectrum of KCNA2-related disorders. Our study provides further insights into the clinical spectrum, genotype–phenotype correlation, variability, and predicted functional impact of KCNA2 variants.     

Paf-acether in human skin

Paf is a phospholipid mediator present in human skin which induces inflammatory events such as neutrophil infiltration and increased vascular permeability. Recent data suggest that cutaneous cells, such as fibroblasts and keratinocytes, produce paf and that paf is released during allergic cutaneous reactions. It is tempting to speculate that paf may contribute to the development of various skin disorders with acute and chronic skin inflammation. Paf antagonists may help in bringing answers to this hypothesis and may offer new prospects for the treatment of cutaneous inflammatory diseases. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends

The rheological properties in solution, in shear and in uniaxial elongation of poly(ethylene terephthalate) (PET) reacted together with hyperbranched polymers (HBPs) were investigated. Two different PET grades, of low and high molecular weights, were compounded with sub‐ to over‐stoichiometric concentrations of HBPs of second and fourth pseudo‐generation, and subsequently subjected to a solid‐state polycondensation (SSP). The formation of microgels, which occurs at high HBP concentration, gave rise to a large increase in melt elasticity and a related decrease in melt strength. At low HBP concentrations, the complex viscosity of the unreacted HBP/PET was considerably reduced, thus demonstrating a lubrication effect of the HBP molecules. During SSP, the intrinsic and shear viscosities exhibited a gradual increase, which was similar for both PET and HBP/PET blends, and was correlated to an increase in molecular weight, through linear‐chain extension and branching reactions. The elongational viscosity of the reactive blends was also increased as a function of reaction time, and this increase was much larger in the case of the HBP/PET blends. A 400% increase in melt strength of the PET was obtained by combining SSP and trace amounts of an HBP of second generation, without any decrease in drawability.     

Étude expérimentale du mélange réactif au sein d'un réacteur torique ondulé (RTO)

Reactive mixing in a wavy torus reactor (WTR) has been examined experimentally. Its performances are compared to these of two other reactors: a plane torus reactor (PTR) and a baffled stirred tank reactor (BSTR). hydrodynamics of mixing has been studied using a plug flow model with axial dispersion for the WTR and PTR. The effect of axial dispersion on the kinetic of a chemical reaction was then analysed for the WTR, PTR and BSTR. Mixing times were slightly longer for the WTR due to a weaker axial dispersion. We also noticed an improvement of the convertion rate for low dissipated power.     

Syndiotactic Polystyrene/Organoclay Nanocomposites: Synthesis via In Situ Coordination‐Insertion Polymerization and Preliminary Characterization

Summary: Syndiotactic polystyrene (sPS)/organophilic clay nanocomposites were obtained by in situ coordination‐insertion polymerization of styrene. Two cationic surfactants (alkylammonium and alkylphosphonium) were used for the intercalation of montmorillonite (MMT). For each organically modified clay, three protocols were performed using an MAO‐activated hemi‐metallocene catalyst, in order to compare the influence of experimental conditions on the composite microstructure and on its thermal stability. The microstructures of nanocomposites were investigated by wide angle X‐ray scattering and DSC. Partially exfoliated or intercalated materials were obtained in all cases and a decrease of crystallinity is observed. Thermal properties were also studied by DSC and thermogravimetric analysis. The presence of clay does not have a strong influence on the sPS thermal transitions but the thermal decomposition process of the material was slowed down in the presence of few organoclay percents, particularly in the degradation beginning. The influence of these two organically modified clays on the thermal stability of the material is discussed.

Gel and suspension formed from the combination of cloisite with toluene (left) and styrene (right), respectively.     

Adsorption of block copolymers at latex surface and their utilization in emulsion polymerization

Amphiphilic block copolymers have been investigated for their utilization in emulsion polymerization of butyl methacrylate. Special attention has been paid to the adsorption mechanism of the block copolymers from systematic measurements of equilibrium adsorption isotherms. A series of well-defined water-soluble amphiphilic block copolymers, composed of poly(butyl methacrylate) and poly(sodium methacrylate) blocks, were synthesized by anionic polymerization of butyl methacrylate and tert-butyl methacrylate followed by the thermal deprotection of the tert-butyl ester groups and final hydrolysis. The number density of emulsion polymer particles N_P varied as [copolymer]^α, α lying between 0.44 and 0.73 according to the hydrophilic content of the copolymers. In contrast with SDS taken as a reference emulsifier, the adsorption of the copolymers was very strong and this provided quite an efficient stabilization of the polymer particles during emulsion polymerization, even at low concentrations (<10⁻⁴ mol L⁻¹) and low coverages (<10% of the interfacial area).     

Motional heterogeneity of polystyrene-block-polybutadiene: a spin probe study

Polystyrene-block-polybutadiene copolymers (SB) with 0.5 mass fraction of styrene were studied by electron spin resonance (ESR) of nitroxide spin probes. The influence of the block length ( and ) and the solvation power of casting solvents on the motional dynamics of spin probe were measured over a wide temperature range. Two nitroxide radicals as spin probes were selected: 2,2,6,6-tetramethyl-4-hydroxypiperidine-1-oxyl benzoate (BzONO) and 2,2,6,6-tetramethyl-4-hydroxypiperidine-1-oxyl (Tempol). Irrespective of the spin probe used two ESR spectral components differing in their motional properties above the phase transition of polybutadiene blocks (PB) were observed. The fast component was assigned to spin probes located in polybutadiene-rich domains and the slow component to spin probes in polystyrene-rich domains. The range of two spectral components and the phase transition of the slow ESR component, T_5mT, depend on the block length. The influence of the interphase and accumulation of free volume in the interphase on the Tempol probe motion was investigated by changing copolymer morphology in the films casted from selective and nonselective solvents. The analysis of the motional heterogeneity from the ratio of the fast and slow motional component presents evidence that in the selective solvent for polystyrene (PS) blocks (2-butanone) the most irregular structure with a large interphase is formed. The difference in fast motion of spin probes indicates that the motional dynamic is related to the change of domain structure.     

Interaction between dietary protein and fat in triglyceride metabolism in the rat: Effects of soy protein and menhaden oil

The objective of the present study was to determine the mechanisms by which dietary proteins interact with dietary lipids in the regulation of triglyceridemia in rats. Male Sprague-Dawley rats (n=56) were subjected to 28-d experimental diets containing different combinations of proteins (20% w/w) and lipid sources (14% w/w): (i) casein-menhaden oil, (ii) casein-beef tallow, (iii) soy protein-menhaden oil, and (iv) soy protein-beef tallow. Significant protein-lipid interactions were observed on triglyceridemia and hepatic cholesterol in fasted rats. The combination of casein and beef tallow was associated with high plasma TG and hepatic cholesterol concentrations, which were reduced by substitution either of soy for casein or of menhaden oil for beef tallow. Therefore, triglyceridemia and liver cholesterol remained low with soy protein feeding, independently of the lipid source, as well as with menhaden oil feeding, regardless of the protein source. The menhaden oil diets reduced plasma cholesterol, hepatic TG, and TG secretion compared with beef tallow diets independently of the dietary protein source. Modifying the source of dietary proteins and lipids had no effect on post-heparin plasma lipoprotein lipase activity. These results demonstrate that soy protein can lower rat triglyceridemia relative to casein when associated with beef tallow consumption, whereas menhaden oil can attenuate hypertriglyceridemia when rats are fed casein. The data further suggest that part of the hypotriglyceridemic effect of soy protein in the rat may be mediated by reduced hepatic lipid synthesis, as is the case for menhaden oil.